Adjustable Desk Review

The StandDesk was produced by millennials, is marketed directly at millennials, and has been gobbled up by millennials in remarkable volumes. While it brings a ten-year warranty (the longest of any type of Chinese-made base), in this case it’s not always a reputable indicator of the anticipated beneficial life of the training columns. For the price, the StandDesk is an excellent lower-cost choice to the UpLift, Jarvis and various other Chinese-made desks. In spite of its stability problems this is a far better item than the Autonomous SmartDesk or IKEA Bekant can ever hope to be, and a good value generally. It’s the mid-priced offering in the broad group of Chinese-made desks that is winning over clients from both its cheaper and pricier peers.

StandDesk Building And Construction, Setup, as well as Devices

Developing the desk is quite simple if you comply with the comprehensive guidelines. All of the screws, bolts, washing machines, and also spring washing machines can be found in different bags that are marked with their location: table top, frame, as well as spares. There’s an included hex device for fastening every one of the screws into the framework, or, appear a hex little bit into your power tool– just take care not to over-tighten.

Every one of the parts have a high quality surface to them with rounded corners to prevent cut hands. Below is a shot of all the screws that are fastened to the leg setting up– it’s not going anywhere!


The foot setting up additionally consists of height-adjustable rotation gears to support the front-to-back motion of the desk, which was extremely handy for the carpeted office flooring. I’m also utilizing a flooring mat to protect the carpet from chair wheel damage at sitting elevation, and press the chair when I’m transitioning to standing height.


The luxurious controller was worth the financial investment. The switches are all variable pressure programmed, implying the backwards and forwards arrowheads will readjust the elevation by 1/10th of an inch with a single press, or constantly adjust the height by around 0.7 inches per second if you hold the switch for 2 secs. The memory buttons are comparable in layout: push to remember the height setting, or hold the button down for 5 seconds to keep a new elevation value. I’m making use of button 1 for my sitting setting as well as switch 4 for my standing position, which gives me 2 and 3 for anything I may need in the future.


Utilizing my Standdesk

I’ve been making use of the brand-new workdesk for a few weeks and have actually made a note of my initial perceptions:

The electric motors are quiet yet can be heard in the next area over. It takes possibly 25 secs for the desk to completely change from sitting to standing based on my presets.
I use an Ergotron side-by-side check arm (especially this LX version), creating the desk to obtain a little rocky when I change my weight versus the keyboard. In knowledge, I ought to have purchased the crossbar upgrade for my desk after establishing the weight of my displays. If you prepare to do a twin screen setup, obtain the bar.

Since gravity compresses the discs in a human spinal column, I require to elevate the desk greater in the early morning and lower it in the evening.

An anti-fatigue floor covering is definitely necessary for long duration standing. I acquired an Octagonal mat from SmartCells, using rubber “cells” that are visualized below.


Regardless of any kind of issues I may have had with the mobile or the cookie-cutter layout, pretty much all of those concerns removed when I in fact got down to using this point.

Although I really did not think it was also possible, the StandDesk somehow handles to be even more secure than the Jarvis, both at sitting and standing elevations. A lot of days I like to run my Jarvis at max height while pressed versus my wall; not necessarily since it’s that shaky, yet just because I desire as much security as I can get.

The StandDesk one ups the gambit even additionally, verifying to be just as stable by itself at standing height as the Jarvis is with wall support. This is all without the firm’s bar enhancement, which they claim adds a lot more stability when acquired as a part of the plan deal.When it concerns weight tolerance, the StandDesk shares yet much more stats with the Jarvis, being ranked for as much as 350 pounds of weight ability.

I’ve been utilizing the desk for concerning three weeks currently for everyday work (and also complying with standing workdesk ideal practices), whether it’s inputting out evaluations similar to this one from our desktop or a laptop computer every so often. The desk stands up well versus non-coastered drinks, as well as the surface on top of the desk still really feels equally as smooth and glossy as the day I opened it in spite of days of sweaty wrists wresting on it and also numerous wipe downs with a rag.

I never ever deliberately attempt to dent any desks as well hard, throughout some lighter examinations (tossing a set of keys onto it from a distance, for example), it still held up without also several visible signs of damages.

When I measured the sound result of the workdesk while it climbed from a sitting placement to standing and also back once more, it was by far the quietest we have actually checked. I might barely get it to make more than regarding 9.5 dB of sound, so if your greatest concern is the whirr of your motor, this is certainly the one for you.

Customer support

Now, typically I do not include much about the customer care assistance of any given business, just due to the fact that I feel that generally if an item works the way its supposed to, I shouldn’t ever have a reason to call them in the first place. And also while I wish I can claim that held true throughout my experience with StandDesk, I just can’t complete this testimonial without stating the countless, apparently unlimited troubles I ran into trying to get my workdesk created.

For starters, the desk I was sent out didn’t have any kind of memory handset consisted of originally, which suggested I had no way of really controlling the up/down feature on the desk itself. I called StandDesk about this issue, who got back to me around a day later on with an apology as well as a pledge that a new one would be shipped out shortly.

Standdesk testimonial handset

The source of all our problems …
Concerning four days later a phone showed up in the mail. The phone at first activated, yet it wasn’t long prior to I noticed that none of the programmable switches functioned, neither did the down switch, but also for some reason the “memory” button dealt with the down feature just great. I spoke to the company once again, and also they apologized for the mixup and claimed they would have a new panel and also control box bent on me within the week.

Over 2 weeks later my new panel and control box showed up. Once I installed them both the desk ultimately started functioning the means it was meant to, however not after virtually a month of waiting as well as back and forth with a company that couldn’t keep in mind to ship a core element of their item inside the same box from the outset.

Things to Consider

In spite of its bankable functions, this stand up desk additionally has its very own downsides. Considering that no singular stand workdesk might record all of the attributes that you might need, you may consider these in your decision-making.

Lack of a Bar as requirement

Not having a stabilizing crossbar is definitely not a deal-breaker, particularly taking into consideration several of our various other favored workdesks such as the Fully Jarvis also do not have one. This workdesk does have one if you want, but it is a paid add-on (a lot more on this later too).

The bar is seen by some as an obstacle, making it more challenging to place your legs pleasantly listed below the desk. Others, on the other hand, discover that they give included stability, often essential when workdesks are totally prolonged.

We have not review any kind of issues of the security of this workdesk, so we don’t believe its something to really be concerned about, although if you truly wanted a desk with a bar after that we recommend you take a look at the Varidesk ProDesk 60 Electric.

Additionally, StandDesk does use a different add-on crossbar that you can add to the desk yourself, just for an added $49.95.


The security of a standing workdesk is among the most essential aspects of these workdesks. Without a stable desk you’ll locate it tough to focus, which could lead to you coming to be much less interested in making use of the desk at standing height. To obtain the most effective return on your investment, you’ll wish to more than happy when utilizing the desk.

Since the StandDesk Simple is the very first workdesk that I have actually examined with an optional cross assistance, I will certainly break down my security tests right into 2 sections. Both tests will consist of the regular front to back shaking test and a delegated ideal wobble. The first will certainly lack the cross support and the second will be with it. Simply to note, states that the addition of the cross support can boost stability by as much as 15%. I have no concept just how they generated that number.

Without Cross Support

Left to Right: The wobble examination was a various situation. StandDesk Simple was the 2nd workdesk that I examined that wobbled at the bottom with weight on the desktop. The initial was the IKEA Bekant. By the time it got to 36″ the shaking activity misbehaved. Beyond this factor it would certainly influence your work.

With Cross Assistance

Front to Back: Adding the cross support does not influence the shaking motion. The StandDesk Simple started to experienced a rocking movement at 36″. By 41″ the rocking activity was bad.

Delegated Right: Including the cross support to the StandDesk enhanced the wobble motion for reduced heights. With the cross assistance the wobble activity didn’t start till you got to 35″. By 39″ the wobble movement ended up being negative.

Note: It’s extremely crucial with adjustable standing desks to completely tighten all equipment. If there is equipment that is not totally limited, the motion experienced when included standing height will certainly be overemphasized. This is particularly real with a workdesk frame that consists of 32 screws, there are much a lot of factors at which the desk has a chance to move.

Final thought

Like all the Chinese bases we’ve evaluated in our labs, we need to tighten our recommendation on the StandDesk Pro to much shorter customers with narrower desktops, as the security just isn’t there for a large mass boosted high off the ground. American-made workdesks will be better fit to these applications, and also for a fairly noticeable reason. Basically all American-made bases are made in US factories that are possessed by Swedish, Danish or German business that designed this market, and also their average residents are a lot taller than the average Oriental consumer, so they began making longer-stroke lifting legs a long period of time earlier. And they have much more robot automation, laser-cutting equipment, and also sheer experience making standing desk bases, needless to say.

If you’re not also high, don’t have an excessive amount of hefty devices on your desktop computer, and also do not need also broad of a desk, the StandDesk Pro will offer you great bang for your buck.

All that could alter with Yu’s promised StandDesk Pro 2.0 style that he expects to release at some time in the future. Originally we were told we ‘d see it by June 2018. Greater than a year later on it has yet to appear, and Yu states he’s had trouble getting the product quality he needs out of numerous Chinese factories he’s attempted collaborating with. The brand-new design is supposedly going to be much easier to assemble and also have a heftier bar layout, to name a few improvements. He states the new base will certainly be used in both a “T-Leg” and “C-Leg” arrangement, minimizing our issue concerning side-load worrying on the training columns.

If this brand-new base ever comes to market we’ll upgrade you right here. We’re not holding our breath any type of longer as the most recent news on the company is that Yu shut the little Los Angeles office and has actually relocated it to join with all its other staff members in southeast Asia.

In the meantime, a new $399 standing workdesk with excellent efficiency has actually been introduce through the brand-new joint endeavor between US-based iMovR and also China-based Eureka, the i1 electrical standing workdesk. While restricted in dimension as well as color choices, it has actually taken the mantle far from StandDesk’s long-ago condition as the most effective standing workdesk under $400.

error: Content is protected !!