Adjustable Desk Top Standing Desk

The StandDesk was created by millennials, is marketed right at millennials, and has actually been demolished by millennials in impressive volumes. While it lugs a ten-year service warranty (the longest of any type of Chinese-made base), in this instance it’s not necessarily a trustworthy indicator of the anticipated useful life of the lifting columns. But for the price, the StandDesk is a terrific lower-cost option to the UpLift, Jarvis as well as various other Chinese-made workdesks. In spite of its stability issues this is a far better product than the Autonomous SmartDesk or IKEA Bekant could ever before want to be, and a good value in general. It’s the mid-priced offering in the wide classification of Chinese-made desks that is gaining clients from both its less expensive and also more expensive peers.

StandDesk Building And Construction, Configuration, as well as Devices

Building the desk is pretty straight forward if you adhere to the thorough instructions. All of the screws, bolts, washers, and also springtime washers come in different bags that are marked with their location: table top, framework, and also spares. There’s a consisted of hex tool for attaching all of the screws into the framework, or, pop in a hex bit into your power device– just take care not to over-tighten.

Every one of the components have a top quality coating to them with rounded edges to avoid cut hands. Below is a shot of all the screws that are fastened to the leg assembly– it’s not going anywhere!


The foot setting up also consists of height-adjustable turning gears to stabilize the front-to-back motion of the desk, which was really useful for the carpeted office floor. I’m also using a floor mat to secure the carpet from chair wheel damage at sitting elevation, and also press the chair back when I’m transitioning to standing elevation.


The deluxe controller deserved the financial investment. The buttons are all variable stress configured, indicating the backwards and forwards arrowheads will readjust the height by 1/10th of an inch with a single press, or continuously adjust the height by about 0.7 inches per 2nd if you hold the button for two seconds. The memory switches are comparable in design: press to recall the elevation setup, or hold the button down for 5 seconds to store a brand-new elevation worth. I’m utilizing switch 1 for my resting position and switch 4 for my standing placement, which gives me 2 and 3 for anything I might need in the future.


Utilizing my Standdesk

I’ve been using the new desk for a few weeks as well as have actually made a note of my first impressions:

The electric motors are quiet yet can be listened to in the following area over. It takes probably 25 secs for the desk to fully transition from sitting to standing based on my presets.
I utilize an Ergotron side-by-side keep an eye on arm (especially this LX version), triggering the desk to obtain a little rough when I move my weight against the key-board. In knowledge, I must have bought the bar upgrade for my workdesk after determining the weight of my displays. If you prepare to do a twin screen setup, get the bar.

Since gravity presses the discs in a human back, I require to elevate the desk higher in the morning and lower it at night.

An anti-fatigue floor covering is absolutely important for long duration standing. I acquired an Octagonal mat from SmartCells, making use of rubber “cells” that are imagined listed below.


In spite of any type of issues I may have had with the mobile or the cookie-cutter layout, virtually every one of those issues washed away when I actually came down to using this thing.

I really did not assume it was even possible, the StandDesk in some way takes care of to be also a lot more secure than the Jarvis, both at resting and also standing heights. Many days I like to run my Jarvis at max height while pressed versus my wall surface; not always since it’s that shaky, yet just because I desire as much stability as I can get.

The StandDesk one ups the gambit even better, proving to be just as steady on its own at standing elevation as the Jarvis is with wall support. This is all without the business’s bar enhancement, which they declare adds much more security when acquired as a part of the bundle deal.When it pertains to weight tolerance, the StandDesk shares yet much more stats with the Jarvis, being ranked for up to 350 lbs of weight ability.

I’ve been making use of the desk for concerning 3 weeks currently for everyday job (and adhering to standing desk ideal methods), whether it’s inputting out reviews such as this one from our desktop or a laptop once in a while. The desk stands up well versus non-coastered beverages, and the coating on top of the desk still really feels equally as smooth and also glossy as the day I opened it in spite of days of perspiring wrists wresting on it and several clean downs with a rag.

I never ever purposefully attempt to damage any type of workdesks also hard, throughout some lighter tests (tossing a collection of secrets onto it from a distance, for example), it still held up without also several visible indicators of damage.

Lastly, when I measured the sound output of the desk while it increased from a sitting position to standing as well as back again, it was without a doubt the quietest we have actually tested yet. I can barely get it to make greater than concerning 9.5 dB of sound, so if your most significant worry is the whirr of your electric motor, this is certainly the one for you.

Client service

Now, normally I do not include much regarding the customer service support of any type of given company, only because I really feel that generally if a product functions the way its meant to, I shouldn’t ever have a reason to call them to begin with. As well as while I wish I can claim that was the case throughout my experience with StandDesk, I merely can not finish this review without mentioning the numerous, apparently endless problems I ran into attempting to get my workdesk created.

For starters, the desk I was sent didn’t have any type of memory handset included initially, which meant I had no way of actually managing the up/down feature on the desk itself. I got in touch with StandDesk about this problem, that returned to me around a day later on with an apology and also a pledge that a new one would be shipped shortly.

Standdesk testimonial handset

The resource of all our issues …
Concerning 4 days later on a mobile phone showed up in the mail. The handset originally turned on, however it had not been long prior to I discovered that none of the programmable buttons functioned, nor did the down switch, but also for some factor the “memory” button managed the down feature simply great. I contacted the business once more, as well as they excused the mixup and said they would have a brand-new panel and control box bent on me within the week.

Over two weeks later my brand-new panel and also control box got here. When I installed them both the desk ultimately started working the method it was supposed to, but not after almost a month of waiting as well as backward and forward with a business that couldn’t remember to deliver a core component of their product inside the exact same box from the start.

Things to Take into consideration

Despite its bankable functions, this stand up workdesk likewise has its very own downsides. Considering that no single stand workdesk can record all of the features that you may require, you might think about these in your decision-making.

Absence of a Bar as standard

Not having a maintaining bar is definitely not a deal-breaker, particularly thinking about some of our various other preferred workdesks such as the Fully Jarvis likewise do not have one. This desk does have one if you want, yet it is a paid add-on (much more on this later on too).

The crossbar is seen by some as a barrier, making it more challenging to position your legs conveniently listed below the desk. Others, on the other hand, discover that they supply included stability, frequently important when desks are fully extended.

We have not read any kind of complaints of the stability of this desk, so we do not believe its something to actually be worried concerning, although if you really wanted a workdesk with a crossbar after that we suggest you have a look at the Varidesk ProDesk 60 Electric.

StandDesk does use a separate add-on crossbar that you can add to the desk on your own, simply for an added $49.95.


The security of a standing workdesk is just one of one of the most crucial aspects of these workdesks. Without a stable workdesk you’ll find it hard to focus, which could lead to you ending up being less interested in making use of the desk at standing height. To obtain the best return on your financial investment, you’ll wish to more than happy when utilizing the desk.

Since the StandDesk Simple is the first workdesk that I have examined with an optional cross assistance, I will break down my security examinations right into two sections. Both tests will certainly consist of the common front to back rocking test and an entrusted to best wobble. The very first will be without the cross assistance and the second will certainly be with it. Simply to keep in mind, says that the addition of the cross assistance can enhance security by as much as 15%. I have no concept exactly how they thought of that number.

Without Cross Support

Left to Right: The wobble examination was a various scenario. StandDesk Simple was the second workdesk that I evaluated that wobbled near the bottom with weight on the desktop computer. The initial was the IKEA Bekant. By the time it got to 36″ the shaking movement was bad. Yet point it would certainly influence your work.

With Cross Assistance

Front to Back: Adding the cross assistance does not impact the rocking activity. The StandDesk Simple began to experienced a shaking activity at 36″. By 41″ the rocking activity was bad.

Delegated Right: Adding the cross assistance to the StandDesk enhanced the wobble motion for reduced heights. With the cross support the wobble motion didn’t begin till you got to 35″. By 39″ the wobble movement ended up being negative.

Keep in mind: It’s extremely important with adjustable standing workdesks to totally tighten up all hardware. If there is hardware that is not totally tight, the activity experienced when extended to standing height will certainly be overemphasized. This is especially true with a desk framework that includes 32 bolts, there are much too many factors at which the desk has an opportunity to move.


Like all the Chinese bases we have actually checked in our laboratories, we need to narrow our suggestion on the StandDesk Pro to much shorter users with narrower desktop computers, as the stability simply isn’t there for a large mass boosted high off the ground. American-made workdesks will be better suited to these applications, and for a relatively evident reason. Virtually all American-made bases are made in United States factories that are had by Swedish, Danish or German companies that invented this market, and their ordinary residents are a lot taller than the average Oriental consumer, so they started making longer-stroke lifting legs a long time earlier. As well as they have much more robot automation, laser-cutting equipment, as well as sheer experience making standing desk bases, obviously.

If you’re not as well tall, do not have an extreme amount of heavy equipment on your desktop, and also don’t need too vast of a desk, the StandDesk Pro will certainly give you good bang for your buck.

All that may transform with Yu’s promised StandDesk Pro 2.0 layout that he anticipates to launch at some point in the future. Originally we were told we would certainly see it by June 2018. More than a year later on it has yet to emerge, and Yu states he’s had difficulty getting the item high quality he needs out of numerous Chinese manufacturing facilities he’s tried working with. The new layout is apparently going to be much easier to construct and also have a heftier crossbar layout, to name a few refinements. He states the new base will be supplied in both a “T-Leg” and “C-Leg” setup, minimizing our concern about side-load emphasizing on the training columns.

If this brand-new base ever involves market we’ll update you right here. Yet we’re not holding our breath any type of longer as one of the most recent news on the company is that Yu closed the small Los Angeles office and also has transferred it to join with all its various other workers in southeast Asia.

In the meantime, a new $399 standing workdesk with outstanding performance has actually been present with the new joint endeavor between US-based iMovR and China-based Eureka, the i1 electric standing workdesk. While limited in size and also shade choices, it has actually taken the mantle away from StandDesk’s long-ago standing as the very best standing workdesk under $400.

error: Content is protected !!